REFERENCES: Distribution Systems

AABC. "Duct Leakage and Air Balancing." Technical Publication No. 2-83. Washington, DC: Associated Air Balance Council. 1983.

[To visit the AABC homepage, click here.]

AABC. "Principles of Air Distribution," Los Angeles, Associated Air Balancing Council. 1965.

[To visit the AABC homepage, click here.]

Altshul, A.D. and P.G. Kiselev. Hydraulics and Aerodynamics, 2d ed. Moscow, USSR: Stroisdat Publishing House. 1975.

AMCA. "Fans and Systems," Standard 201-73, Arlington Heights IL. 1973.

ANSI Z9.2, "American National Standard: Fundamentals Governing the Design and Operation of Local Exhaust Systems", American National Standards Institute, Inc., ANSI Z9.2-1979. New York: Global Engineering Documents, 1979.

Arklin, H. and A. Shitzer. "Computer Aided Optimal Life-cycle Design of Rectangular Air Supply Duct Systems." ASHRAE Transactions, 1979 Vol.85, Part 1, pp. 197-213.

[To visit the ASHRAE homepage, click here.]

ASHRAE Fundamentals Handbook. Chapter 34, "Duct Design." Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2001.

[To visit the ASHRAE homepage, click here.]

ASHRAE HVAC Applications Handbook. Chapter 47. Sound and Vibration Control. Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 2003.

[To visit the ASHRAE homepage, click here.]

ASHRAE "HVAC Duct Fitting Data Base," Research Project 574-RP, Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 1994.

[To visit the ASHRAE homepage, click here.]

ASHRAE HVAC Systems and Equipment Handbook. Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 2000.

[To visit the ASHRAE homepage, click here.]

ASHRAE Professional Development Seminars - Air System Design and Retrofit. Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 1993.

[To visit the ASHRAE homepage, click here.]

ASHRAE Standard 120P, "Laboratory methods of determining flow resistance of air duct and fittings." Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc., 1995.

[To visit the ASHRAE homepage, click here.]

ASHRAE Standard 126-2000 -- Method of Testing HVAC Air Ducts (ANSI approved) (SMACNA standard), ISBN/ISSN: 1041-2336, NO. OF PAGES: 15 pp., 2000.

ASHRAE/SMACNA/TIMA. "Investigation of Duct Leakage." ASHRAE Research Project 308. 1985.

[To visit the ASHRAE homepage, click here.]

Bellman, R.E. Dynamic programming. New York: Princeton University Press. 1957.

Belsky, J.S. "Design HVAC Systems for Laboratories." Pharmaceutical Engineering, Vol.11, No.4 July/ August, 1991.

[To visit the Pharmaceutical Engineering homepage, click here.]

Bertschi, R.L. "A Computer Program to Optimize the Life-cycle Cost of a Fan-duct System." Urbana: University of Illinois (thesis), 1969.

Bouwman, H.B. "Optimal Duct System Design." Delft, Netherlands: TNO Research Institute for Environmental Hygiene, Indoor Climate Division. 1982.

Brooks, P.J. "Duct design fundamentals." ASHRAE Journal, April 1995, Vol.37, no.4, 69-76, 3 figs, 1 tab, 10 refs. ISSN 0001-2491, 1995.

Brooks, P.J. "New ASHRAE local loss coefficients for HVAC fittings" ASHRAE Transactions: 1993, Vol.99, Part.2, paper number 3709 (RP-551): 169-193, 40 figs, 12 tabs, refs.; 1993.

Building Performance - Fume Hood Retrofits, Pacific Gas and Electricity Energy Center, eds. San Francisco, CA: PG&E, 1994.

[To visit the Pacific Gas and Electric homepage, click here.]

Burns, J.T.; William F. Milburn, Ph.D., P.E.; "Specification and Performance of Testing and Balancing in Biologics Facilities" ASHRAE Trans. 1999: CH-99-9-2, Winter Meeting, Chicago, 1999.

Butakov, S.E., Aerodynamics of Industrial Ventilation. Moscow, USSR: Profstroisdat Publishing House, 1949.

Carroll, John, Jr. P.E., C.P.E. "Designing Safe and Efficient Fume Hoods at Research Lab." AIPE Facilities, March-April 1995.

[To visit the AFE Facilities (formerly AIPE Facilities) homepage, click here.]

Chan, T., "Oversized pumps, cooling towers can undersize the savings your chiller produces." Engineered Systems. Troy, MI.; April 1999, Vol. 16, No. 4: 46-47; 1999.

Ciborowski, Thomas J., P.E., and Herb Pluemer. "Actual Results of Energy Efficient Designs." Cleanroom Technology Forum Proceedings, 1991.

Coad, W.J. "Simplified sizing of pipes and ducts." Heating, Piping, Air Conditioning, July 1985.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

Coad, W.J. "Energy Concepts of Air Handling Systems." Heating, Piping, Air Conditioning, August 1980.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

Colebrook, C.F. "Turbulent Flow in Pipes with Particular Reference to the Transition Region Between the Smooth and Rough Pipe Laws." Journal of the Institution of Civil Engineers, Vol 1. 1938.

Coogan, J.J., "Effects of Surrounding Spaces on Rooms Pressurised by Differential Flow Control" ASHRAE Trans., 1996, vol.102, part 1, paper no.3933, 18-25, 9 figs, refs., 1996.

Data Research Utility Costs Forecasting, Data Resources Inc., Service Review, McGraw Hill Publishing House. 1985.

Dean R.H., and J. Ratzenberger "Computer Simulation of VAV system Operation." Heating, Piping, Air Conditioning, September 1985.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

Dean R.H., F.J. Dean, and J. Ratzenberger "Importance of Duct Design for VAV Systems." Heating, Piping, Air Conditioning, August 1985.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

DeLuga, Greg, P.E. "Special Testing: Controlling VAV Laboratory Ventilation Systems (Part I)." Buffalo Grove, IL: Landis and Gyr Powers, Inc., 1995.

DeLuga, Greg, P.E. "Differential airflow, pressure have key relationship in pressurization." R&D magazine Laboratory Design Newsletter; January, 1998.

Durfee, R.L. "Measurement and Analysis of Leakage Rates from Seams and Joints of Air Handling Systems." AISI Project No. 1201-351/SMACNA Project No. 5-71. 1972.

"Efficient Pump Systems." Rocky Mountain Institute (RMI), Snowmass, CO; 2000.

Energy Information Administration (EIA) 1985. "Utility Cost Forecasting." Washington D.C.:, 1985.

[To visit the EIA's homepage, click here.]

Energy Information Administration (EIA) 1995. "Electric Sales and Revenue" Washington D.C., 1994.

[To view this paper in its entirety, click here.]

Evans, R.A. and R.J. Tsal. "Basic tips for duct design." ASHRAE Journal, vol.38, no.7, 37-42, 5 figs, refs. ISSN 0001-2491, July 1996.

Farajian, T., G. Grewal, R.J. Tsal. "Post-accident Air Leakage Analysis in a Nuclear Facility via T-Method Airflow Simulation." 22nd DOE/NDC Nuclear Air Cleaning and Treatment Conference, Denver, CO. 1992.

Farguhar, H.E. "System Effect Values for Fans." ASHRAE Symposium Bulletin. Louisville, Kentucky. 1973.

[To visit the ASHRAE homepage, click here.]

Fox, R.L. Optimization Methods for Engineering Design, Reading, MA: Addison-Wesley Publishing Company. 1971.

Graham, J.B. "Duct System Pressure Gradient Diagrams and the Beer Cooler Problem." Heating, Piping, Air Conditioning. August, 1996.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

Gregory, W.S., K.H. Duerre, and G.A. Bennett. "Ventilation system analysis during tornado conditions." Los Alamos, NM: Los Alamos Scientific Laboratory, Progress Report LA-6293-PR, July-December 1975.

Groenke, S., M. Schwedler, PE, "Series-Series Counterflow for Central Chilled Water Plants." ASHRAE Journal. Atlanta, GA. Vol. 44, No. 6: p. 23-29, June 2002.

Grossman, Irwin. "Troubleshooting Lab Systems: Comparing Laboratory Airflow Control Systems: A practical guide to a complex subject." Engineered Systems,. Troy, MI. September 1995.

[To visit the Engineered Systems homepage, click here.]

Hartman, T., PE, "All-Variable Speed Centrifugal Chiller Plants." ASHRAE Journal. Atlanta, GA. Vol. 43, No. 9: p. 43-51, September 2001.

Hitchings, D.T., PE; "Laboratory space pressurization control systems." ASHRAE Journal, February 1994, vol.36, no.2, 36-40, 2 figs, 2 refs. ISSN-0001-2491, 1994.

Hitchings, D. T., PE; R. S. Shull, PE; "Measuring and calculating laboratory exhaust diversity - three case studies." ASHRAE Transactions: 1993, Vol.99, Part 2, Paper number DE-93-18-1, 1059-1071, 9 figs., 2 tabs., refs, 1993.

Houghton D.J., R. C. Bishop, A. B. Lovins, and B. L. Stickney. 1992. "Space Cooling and Air Handling." Boulder, CO: E-Source Inc. report, August, 1992.

[To visit the E-Source homepage, click here.]

Hu, S.; Qingyan Chen, PH.D.; Leon R. Glicksman, PH.D. "Comparison of Energy Consumption between Displacement and Mixing Ventilation Systems for Different U.S. Buildings and Climates" 1999, ASHRAE Annual Meeting, SE-99-7-4 (RP-949), 1999.

Idelchik, I.E., and M.O. Steinberg. Handbook of Hydraulic Resistance. 3rd edition, Begell House, Inc. 1996.

[To purchase this book from the publisher, click here.]

Industrial Ventilation: A Manual of Recommended Practice – 24th Edition. The American Conference of Governmental Industrial Hygienists, Inc. (ACGIH), eds. Cincinnati, OH. ISBN: 1-882417-42-9, 2001.

[To purchase this book from the publisher, click here.]

Kamenev, P.N. Flow Dynamics of Industrial Ventilation. Moscow, USSR: Stroisdat Publishing House. 1938.

Kirsner, W., PE, "The Demise of the Primary-Secondary Pumping Paradigm for Chilled Water Plant Design." Heating/Piping/Air Conditioning HPAC Engineering. November, 1996.

Konstantinov, U.M. Hydraulics. Kiev, USSR: Vischa Scola Publishing House. 1981.

Kovaric, M. "Automatic Design of Optimal Duct Systems". Use of computers for environmental engineering related to buildings. Washington D.C.: National Bureau of Standards, Building Science Series 39, October, 1971.

Kruse, Robert K., P.E. "Mechanical System Strategies for Energy Efficiency." Cleanroom Technology Forum Proceedings, 1991.

Laboratory Control and Safety Solutions Application Guide - Rev. 2. Buffalo Grove, IL: Landis and Gyr Powers, Inc., 1994.

Langhorst, P., C. Hancock; "Motor-Drive Compatability." Engineered Systems. Troy, MI.; November 1996, Vol. 13, No. 11; 1996.

Larson E D., L J. Nilsson; " Electricity use and efficiency in pumping and air-handling systems" ASHRAE Trans. 1991, vol.97, Part 2, Paper number 3530, 363-377, 10 figs., 6 tabs., refs.; 1991..

Leah, R.L., C.O. Pedersen, and J.S. Liebman. "Optimisation using quadratic search - a case study of a chilled water system." ASHRAE Transactions, Vol.93, Part 2, 1987: 2109-2122, 5 figs, 4 tabs, refs. 1987.

Liu, M., PhD, Zhu, Y., Claridge, D.E., PhD, PE, White, E., PE; "Impacts of Static Pressure Set Level on HVAC Energy Consumption and Indoor Conditions" ASHRAE Trans., 1997, Vol.103, Part 2, Paper number 4074: 221-228, 14 figs, 1 tab, refs, 1997.

Lobaev, B.N. Duct Calculation. Kiev, USSR: Gosstroy Publishing House. Available from the Library of Congress, Washington D.C. 1959.

Mayhew, F.W. "Application of direct digital temperature control systems for maximum system efficiency." ASHRAE Transactions: 1993, Vol.99, Part 1, Paper number CH-93-3-4: 801-807, 3 figs., 2 tabs., 3 refs, 1993.

McDiarmid, M.D., P.E. "A quantitive evaluation of air distribution in full scale mock-ups of animal holding rooms." ASHRAE Trans., 1988, Vol. 94, Part 1, 685-693, 7 figs, 1 tab, 4 refs. AND in Laboratory HVAC, 1995, 89-94, ISBN 1-883413-25-7, 1988.

McIlvaine, Robert W. "Chapter 1, Rooms; Chapter 4, Engineering & Design." Cleanrooms — 1992-2000, Rooms and Components Vol. Three. McIlvaine, Robert W., Sally Halderman, Alpa Bagga, and Joseph Schwartz, eds. Northbrook, IL: The McIlvaine Co., 1992.

[To visit the McIlvaine Company homepage, click here.]

McQuiston, F.C., PE, In Letters section in response to: "Primary-Only vs. Primary-Secondary Variable Flow Systems." ASHRAE Journal. Atlanta, GA. Vol. 44, No. 4, April 2002.

Means R.S. "Mechanical Cost Data. HVAC." Kingston, MA.: R.S. Means Company, Inc. 1997.

[To purchase this book from the publisher, click here.]

Memarzadeh, F., PhD., PE, "Of Mice, men, & research." Engineered Systems. Troy, MI.; April 1999, Vol. 16, No. 4; 1999.

Meyer, M.L. "A New Concept: The Fan System Effect Factor." ASHRAE Symposium Bulletin. 1973.

[To visit the ASHRAE homepage, click here.]

Micro-Electronics Facility Efficiency Workshop: Meeting Report, Northwest Power Planning Council, Portland, Oregon, 1995.

[To visit the Northwest Power Planning Council homepage, click here.]

Monsen, R.R., PE. "Practical solutions to retrofitting existing fume hoods and laboratories." ASHRAE Transactions: 1989, Vol.95, Part 2, 845-851, 6 figs, refs. (AND in Laboratory HVAC, 1995, 65-72), ISBN 1-883413-25-7, 1989.

Moody, L.F. "Friction factor for pipe flow." ASME Transactions, Vol.66: p. 671. 1944.

[To visit the ASHRAE homepage, click here.]

Murphy G.C. "Practical Aspects of Ductwork Design." ASHRAE Journal, October 1976.

[To visit ASHRAE Journal Online, click here.]

Murtagh, B.A. "An Approach to the Design of Networks". Chemical Engineering Science, Vol.27: pp.1131-1143, Permagon Press. 1972.

NAFA Guide to Air Filtration. NAFA Certification Committee, eds. Washington, DC: NAFA, 1993.

[To visit the NAFA homepage, click here.]

Naughton, P., P.E. " HVAC systems for semiconductor clean rooms —Part 1: System Components." ASHRAE Transactions: 1990, Vol.96, Part 2, paper number SL-90-5-3: 620-625, 7 figs, refs, 1990.

Nillson, L.J. "Energy Systems in Transition." Lund, Sweden: Department of Environmental and Energy Systems Studies, 1993.

Patel, Bill, Jerry Greiner, Tom Huffman, and Les Grant. "Designing a High Performance, Low Energy Cost Cleanroom A Case Study." Cleanrooms '91 Proceedings, 1991.

Rozell, J.M. "Duct Turning Vanes in 90° Elbows." ASHRAE Transactions: Vol. 80(2):53, 1974.

[To visit the ASHRAE homepage, click here.]

Ruys, Theodorus, AIA, ed., Handbook of Facilities Planning, Vol. One, Laboratory Facilities. ISBN 0-442-31852-9. New York: Van Nostrand Reinhold, 1990..

Saunders, G. Thomas; Laboratory Fume Hoods - A User's Manual; ISBN 0-471-56935. New York, NY: John Wiley & Sons, Inc. , 1993.

[To purchase this book from the publisher, click here.]

Scott K.B. "Don't Ignore Duct Design for Optimized HVAC Systems." Specifying Engineer, No. 62, January, 1986.

Shepard, M., J. Gregerson, D.J. Houghton P.E., L. Fryer, J. Elleson, B. Pattinson, W. Hawthorne, L. Wester, J. Stein, D. Davia, and S. Parson. Commercial Space Cooling and Air Handling Technology Atlas. E Source, Inc., Boulder, CO, June 1995.

[To view the E Source homepage, click here.]

Shifrinson, B.L. "New Method for District Water System Optimization", Heat and Power, No.2. Moscow, (Feb.):pp. 4-9. Available from the Library of Congress, Washington D.C., 1937.

SMACNA 1975. Industry Practice for Industrial Duct Construction.

[To visit the SMACNA homepage, click here.]

SMACNA 1985. HVAC Air Duct Leakage Test Manual.

[To visit the SMACNA homepage, click here.]

SMACNA 1990. HVAC Systems - Duct Design, third edition.

[To visit the SMACNA homepage, click here.]

SMACNA 1995. HVAC Duct Construction Standards -- Metal and Flexible, 2nd Edition, Chantilly, VA: Sheet Metal and Air Conditioning Contractor's Association.

[To visit the SMACNA homepage, click here.]

SNIP 1976. II-33-75, Gosstroy, Stroysdat, Part II, Chapter 33, Moscow, USSR.

Stoecker, W. F., L. P. Rinck, and J. P. Wegrzyn. "Simulating flow rates, pressures, and temperatures in central chilled water systems." Second Symposium on the Use of Computers for Environmental Engineering Related to Buildings, Paris, June 13-15 1974.

Stoecker, W.F., R.C. Winn, and C.O. Pedersen. "Optimization of an Air-supply Duct System". Use of computers for environmental engineering related to buildings. Washington D.C.: National Bureau of Standards, Building Science Series 39, October 1971.

Swim, W.B. Analysis of Duct Leakage. ETL Data from ASHRAE RP 308, 1984.

Takenami, Toshihito, Hitoshi, Inaba and Tadahiro, Ohmi. "Total System Cost Effectiveness Must Keep Pace with Submicron Manufacturing." Microcontamination, August 1994.

[To visit the Solid State Technology homepage, click here.]

Taylor, S.T., PE, "Balancing Variable Flow Hydronic Systems." ASHRAE Journal. Atlanta, GA. Vol. 44, No. 10: p. 17-24, October 2002.

Taylor, S.T., PE, "Primary-Only vs. Primary-Secondary Variable Flow Systems." ASHRAE Journal. Atlanta, GA. Vol. 44, No. 2, February 2002.

T-DUCT Computer Program Manual. NETSAL & Associates, 1994.

Tsal, R.J. "Calculation Techniques for Optimum Duct Design and Flow Simulation." ASHRAE Research Project 516-RP and Fluor Research Project 321563, 1988.

[To visit the ASHRAE homepage, click here.]

Tsal, R.J. and E.I. Chechik. "Use of Computers in HVAC Systems." Kiev, USSR: Budivelnick Publishing House. Available from the Library of Congress, Washington D.C. ,service number TD153.T77, 1968.

Tsal, R.J. and H.F. Behls. "'Ducting' In Technology Menu for Efficient End Use of Energy." Lund, Sweden: University of Lund, Gerbagatan, 1989.

Tsal, R.J. and H.F. Behls. "Evaluation of duct design methods." ASHRAE Transactions, Vol. 92: Part 1A. 1986.

Tsal, R.J. and H.F. Behls. "Using the T-method for duct system design." ASHRAE Journal, March 1990, vol.32, no.3, 30-32, 34-36, 40, 44-45, 1 fig, 1 tab. ISSN-0001-2491, 1990.

Tsal, R.J. and L.P. Varvak. "Duct Design Using the T-Method with Duct Leakage Incorporated." ASHRAE Research Project 641-RP, 1992.

[To visit the ASHRAE homepage, click here.]

Tsal, R.J. and M.S. Adler. "Evaluation of numerical methods for ductwork and pipeline optimization." ASHRAE Transactions, Vol.93:Part 1. 1987.

Tsal, R.J. and N.Z. Shor. "The use of the steepest descent method for calculating flow distribution in a duct system." Economical cybernetics and operation research, No.2. Kiev, USSR: Institute of Cybernetics Publication, 1967.

Tsal, R.J. and P.W. Othmer. "New Method for Duct Design, CLIMA 2000." The Second International Congress on Heating, Refrigerating and Air Conditioning, Sarajevo, Yugoslavia. 1989.

Tsal, R.J., and H.F. Behls. "Fallacy of the static regain duct design method." ASHRAE Trans. 1988, vol.94, Part 2: 76-89, 4 figs, refs., 1988.

Tsal, R.J., H.F. Behls, and R. Mangel "T-method duct design - Part 1, optimisation theory and T-method duct design - Part 2, calculation procedure and economic analysis." ASHRAE Transactions, Vol. 94, Part 2: 90-150, 1988.

Tsal, R.J., H.F. Behls, L.P.Varvak. "T-Method Duct design. Part IV: Duct Leakage Theory and Part V: Duct Leakage Calculation Technique and Economics." Presented at ASHRAE meeting in Ottawa, Canada, 1998.

Tsal, R.J., H.F. Behls, R. Mangel. "T-method duct design, Part III - simulation." ASHRAE Transactions: 1990, Vol.96, Part 2, paper number 2282: 3-31, 6 figs, 23 tabs, refs., 1990.

Tsal, R.J., Ph.D., "Modeling of Laboratory Air Distribution Systems." NETSAL & Associates; September, 1999.

Tsal, R.J., Ph.D.; Herman F. Behls, P.E.; Leo P. Varvak, Ph.D.; "T-Method Duct Design, Part V: Duct Leakage Calculation Technique and Economics" ASHRAE Trans. 1998: 4182, 1998

Tsal, R.J., Ph.D.; Herman F. Behls, P.E.; Leo P. Varvak, Ph.D.; "T-Method Duct Design: Part IV-Duct Leakage Theory" ASHRAE Trans. 1998: 4181, Annual Meeting, Toronto, 1998.

Wang, J., Ph.D., Ogilvie, J.R., Ph.D., PE; "Airflow Distributions at Floor Level in a Slot-Outlet and Slot-Inlet Ventilated Room" ASHRAE Trans. 1996, Vol.102, Part 2, Paper number SA-96-1-6, 347-358, figs., tabs., refs., 1996.

Watts, Wayne, P E. "Meeting Lab Requirements: An Engineer's Point of View." Engineered Systems, Troy, MI. September, 1995.

[To visit the Engineered Systems homepage, click here.]

Weale, J., PE, P.H. Rumsey, PE, D.A. Sartor, PE, L.E. Lock, "Laboratory Low-Pressure Drop Design." ASHRAE Journal. Atlanta, GA. Vol. 44, No. 8, August 2002.

Wendes. "Sheet Metal Estimating." Wendes Engineering and Constructing Services, Inc. 1986.

Wier, R. C., PE. "Toxicology and animal facilities for research and development." ASHRAE Transactions: 1983, Vol.89, Part 2B, 533-541, 1 tab, 23 refs. (AND in Laboratory HVAC, 1995, 83-88), ISBN 1-883413-25-7, 1983.

Wise, Steve and Susan Dineen. "Using Active Noise Control to Design Quiet, Energy-Efficient HVAC Systems." Clean Rooms '95 East Proceedings, 1995.

Williams, G.J. "Air Systems Basics." Heating, Piping, Air Conditioning, May 1995.

[To visit the Heating, Piping, Air Conditioning homepage, click here.]

Wiseman, B., P.E., "Room Pressure for Critical Environments" ASHRAE Journal, vol. 45, no. 2, p. 34-39, February 2003.

Yuan, Xiaoxiong, Ph.D.; Qingyan Chen, Ph.D., Leon R. Glicksman, Ph.D. "Performance Evaluation and Design Guidelines for Displacement Ventilation" ASHRAE Trans. 1999, 4259 (RP-949), 1999.

Yuan, Xiaoxiong, PhD; Qingyan Chen, PhD., Leon R. Glicksman, PhD, "A Critical Review of Displacement Ventilation" ASHRAE Trans. 1998, Vol.104, Part 1, 4101 (RP-949), 1998.

Zanfirov, A.M. "Optimization of Water District Heating Systems, Heat and Power." Moscow, USSR: Vol. 11:pp.4-10. November. Available from the Library of Congress, Washington D.C. 1933.


Home Contents Previous Next